SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM2000INTREPID R/TREPAIR AND DIAGNOSIS (SINGLE PAGE)RESTRAINTSAIR BAG, SRSSUPPLEMENTAL INFLATABLE RESTRAINT SYSTEM DEACTIVATION PROCEDURESGENERAL MOTORSDISABLING & ACTIVATING AIR BAG SYSTEMDISABLING SYSTEM (CAVALIER & SUNFIRE)
2000 Dodge and Ram Intrepid R/T

Disabling System (Cavalier & Sunfire)

2000 Dodge and Ram Intrepid R/TSECTION Disabling System (Cavalier & Sunfire)
  1. Before proceeding, follow air bag service precautions. See SERVICE PRECAUTIONS . Turn front wheels to straight-ahead position. Turn ignition switch to LOCK or OFF position and remove key.
  2. Remove AIR BAG fuse from fuse block. Fuse block is located behind cover on far left end of instrument panel. Wait at least 10 minutes. Remove lower sound insulator panel from left side of instrument panel. Remove the Connector Position Assurance (CPA) clip, and disconnect driver air bag 2-pin Yellow SIR connector at base of steering column. See Fig 1.
  3. Remove the Connector Position Assurance (CPA) clip. Disconnect passenger air bag 2-pin Yellow SIR connector at base of steering column. See Fig 1.
Fig 1: Locating Air Bag Yellow 2-Pin Connectors (Cavalier & Sunfire)
G98E09875Courtesy of GENERAL MOTORS CORP.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.