Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM1999CARAVAN BASE, 2.4 BREPAIR AND DIAGNOSIS (SINGLE PAGE)BODY & FRAMEPOWER WINDOWSREMOVAL & INSTALLATION"D" PILLAR TRIM PANEL (RIGHT)REMOVAL
1999 Dodge and Ram Caravan Base, 2.4 B
"D" Pillar Trim Panel (Right): Removal
1999 Dodge and Ram Caravan Base, 2.4 BSECTION Removal
- Remove rear header trim cover.
- Remove liftgate sill plate.
- Remove second row seat belt turning loop on long wheel base vehicle.
- Remove bolt attaching second row seat belt, if equipped, anchor to quarter on short wheel base vehicle.
- Remove quarter trim bolster on short wheel base vehicle.
- Remove screws attaching trim panel to attaching bracket on short wheel base vehicle. See Fig 1 .
- Disengage hidden clips attaching trim to "D" pillar. See Fig 1 -Fig 3 .
- Remove "D" pillar trim panel from "D" pillar.
- Disconnect speaker wire connector, if equipped.
- Pass second row seat belt, if equipped, through slot in trim panel on short wheel base vehicle.
- Remove "D" pillar trim from vehicle.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.