Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM1999CARAVAN BASE, 2.4 BREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTCRUISE CONTROL SYSTEMSOPERATIONSYSTEM CONTROLSTO SET SPEED CONTROL
1999 Dodge and Ram Caravan Base, 2.4 B
To Set Speed Control
1999 Dodge and Ram Caravan Base, 2.4 BSECTION To Set Speed Control
Press ON/OFF switch to turn on speed control system. Accelerate to desired speed (30-85 MPH) and press SET switch. Vehicle speed will be stored and maintained by PCM until speed control is disengaged.
NOTE:
Speed control system will automatically disengage when vehicle speed increases or decreases at a rate of 10 MPH per second or excessive engine RPM is sensed.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.