Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM1996NEON L4-2.0L SOHCREPAIR AND DIAGNOSISSPECIFICATIONSCAPACITY SPECIFICATIONSENGINEENGINE LUBRICATIONSYSTEM SPECIFICATIONS
1996 Dodge and Ram Neon L4-2.0L SOHC
System Specifications
1996 Dodge and Ram Neon L4-2.0L SOHCSECTION System Specifications
TYPE SH, GF-1 [1]
VISCOSITY
Below 38° C (100° F) 5W-30
Above 38° C (100° F) 10W-30
CAPACITY
With filter 4.25 l (4.5 qts)
Without filter 3.8 l (4.0 qts)
[1] Energy Conserving II
VISCOSITY
Below 38° C (100° F) 5W-30
Above 38° C (100° F) 10W-30
CAPACITY
With filter 4.25 l (4.5 qts)
Without filter 3.8 l (4.0 qts)
[1] Energy Conserving II
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.