Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM1996NEON L4-2.0L SOHCREPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSMAIN RELAY (COMPUTER/FUEL SYSTEM)LOCATIONS
1996 Dodge and Ram Neon L4-2.0L SOHC
Main Relay (Computer/Fuel System): Locations
1996 Dodge and Ram Neon L4-2.0L SOHCSECTION Locations
Fig. 15 Power Distribution Center (PDC):
Auto Shutdown Relay:
The relay is located in the Power Distribution Center (PDC) (Fig. 15). The PDC is located next to the battery in the engine compartment. For the location of the relay within the PDC refer to the PDC cover for location. Check electrical terminals for corrosion and repair as necessary.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.