Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM1996NEON L4-2.0L SOHCREPAIR AND DIAGNOSISLIGHTING AND HORNSDESCRIPTION AND OPERATIONINTERIOR LIGHTING
1996 Dodge and Ram Neon L4-2.0L SOHC
Interior Lighting
1996 Dodge and Ram Neon L4-2.0L SOHCSECTION Interior Lighting
CIRCUIT OPERATION
The courtesy lamp system is powered at all times by the 10 Amp fuse located in the Power Distribution Center (PDC). The M1 circuit feeds the courtesy lamps, which include the trunk lamp, underhood lamp, visor/vanity lamps, dome lamp, time delay relay, and the glove box lamp.
The courtesy lamp system is powered at all times by the 10 Amp fuse located in the Power Distribution Center (PDC). The M1 circuit feeds the courtesy lamps, which include the trunk lamp, underhood lamp, visor/vanity lamps, dome lamp, time delay relay, and the glove box lamp.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.