Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM1996CARAVAN V6-229 3.8LREPAIR AND DIAGNOSISBODY AND FRAMELOCKSKEYLESS ENTRYKEYLESS ENTRY MODULETESTING AND INSPECTION
1996 Dodge and Ram Caravan V6-229 3.8L
Keyless Entry Module: Testing and Inspection
1996 Dodge and Ram Caravan V6-229 3.8LSECTION Testing and Inspection
- Check the 30 Amp circuit breaker located under the drivers seat
- Check the 40 Amp fuse located in cavity 2 of the PDC
- Check the ground at the instrument panel left side cowl
- Check the 40 Amp fuse located in cavity 2 of the PDC
- Check the ground at the instrument panel left side cowl
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.