Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM1996CARAVAN L4-2.4L DOHCREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER BLOCK ASSEMBLYSYSTEM SPECIFICATIONS
1996 Dodge and Ram Caravan L4-2.4L DOHC
System Specifications
1996 Dodge and Ram Caravan L4-2.4L DOHCSECTION System Specifications
All Specifications Given In Inches Unless Otherwise Noted.
Cylinder Bore Diameter (Std.) 3.4446 - 3.4452
Cylinder Bore Taper Max. 0.002
Cylinder Bore Out Of Round Max. 0.002
Cylinder Block Warpage Limit 0.008
Sleeve Protrusion -
Combustion Deck Height -
Cylinder Bore Diameter (Std.) 3.4446 - 3.4452
Cylinder Bore Taper Max. 0.002
Cylinder Bore Out Of Round Max. 0.002
Cylinder Block Warpage Limit 0.008
Sleeve Protrusion -
Combustion Deck Height -
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.