Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM1996CARAVAN L4-2.4L DOHCREPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSTRANSMISSION POSITION SENSOR/SWITCHSERVICE AND REPAIRSWITCH, TRANSMISSION RANGE
1996 Dodge and Ram Caravan L4-2.4L DOHC
Switch, Transmission Range
1996 Dodge and Ram Caravan L4-2.4L DOHCSECTION Switch, Transmission Range
Note: The Transmission Range Sensor is a different component from the Transmission Range Switch. Description and Operation
Transmission Range Switch:
The torque for the white Transmission Range Switch (formerly called PRNDL) is 34 Nm (25 ft. lbs.).
Park/Neutral Position Switch:
The torque for the black [1][2]Park/Neutral Position Switch (formerly called Neutral Safety Switch) is 34 Nm (25 ft. lbs.).
Caution: Switch seal washer must be seated properly before tightening switch. Failure to do so may result in leakage of transmission fluid.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.