Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM1995INTREPID ES, 3.3 UREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 30 (WHEEL ALIGNMENT SPECIFICATIONS & PROCEDURES)ALIGNMENT SPECIFICATIONS
1995 Dodge and Ram Intrepid ES, 3.3 U
Alignment Specifications
1995 Dodge and Ram Intrepid ES, 3.3 USECTION Alignment Specifications
WARNING: This page is about a different car, the 1995 Chrysler New Yorker, 1995 Chrysler LHS, and 1995 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.
WHEEL ALIGNMENT SPECIFICATIONS
| Application | Preferred | Range |
|---|---|---|
| Camber (Degrees) Front | 0 | -0.6 to 0.6 |
| Camber (Degrees) Rear | -0.1 | -0.6 to 0.4 |
| Caster (Degrees) Front | 3 | 2 to 4 |
| Caster (Degrees) Rear | N/A | N/A |
| Toe-In (Inches) Front | 0.1 | 0 to 0.2 |
| Toe-In (Inches) Rear | 0.05 | -0.1 to 0.2 |
| Toe-In (Millimeters) Front | 2.5 | 0 to 5 |
| Toe-In (Millimeters) Rear | 1.5 | -2.5 to 5 |
| Toe-In (Degrees) Front | 0.2 | 0 to 0.4 |
| Toe-In (Degrees) Rear | 0.1 | -0.2 to 0.4 |
| Wheelbase (Inches) | 113 | N/A |
| Wheelbase (Millimeters) | 2870 | N/A |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.