Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM1995INTREPID ES, 3.3 UREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 29 (WHEEL ALIGNMENT SPECIFICATIONS & PROCEDURES)ALIGNMENT SPECIFICATIONS
1995 Dodge and Ram Intrepid ES, 3.3 U
Alignment Specifications
1995 Dodge and Ram Intrepid ES, 3.3 USECTION Alignment Specifications
WARNING: This page is about a different car, the 1995 Eagle Vision. However, it is still accessible from the selected car via links, so may be relevant.
WHEEL ALIGNMENT SPECIFICATIONS
| Application | Preferred | Range |
|---|---|---|
| Camber (Degrees) Front | 0 | -0.6 to 0.6 |
| Camber (Degrees) Rear | -0.1 | -0.6 to 0.4 |
| Caster (Degrees) Front | 3 | 2 to 4 |
| Caster (Degrees) Rear | N/A | N/A |
| Toe-In (Inches) Front | 0.1 | 0 to 0.2 |
| Toe-In (Inches) Rear | 0.05 | -0.1 to 0.2 |
| Toe-In (Millimeters) Front | 2.5 | 0 to 5 |
| Toe-In (Millimeters) Rear | 1.5 | -2.5 to 5 |
| Toe-In (Degrees) Front | 0.2 | 0 to 0.4 |
| Toe-In (Degrees) Rear | 0.1 | -0.2 to 0.4 |
| Wheelbase (Inches) | 113 | N/A |
| Wheelbase (Millimeters) | 2870 | N/A |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.