Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
1995 Dodge and Ram Caravan Base, 2.5 K
Quick Lookups: Fluids
1995 Dodge and Ram Caravan Base, 2.5 KSECTION Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | w/o Rear AC | 5.00 OZS. | 0.14 L | PAG 46 | S | ||
| Air Cond Compressor Oil | w/Rear A/C | 7.40 OZS. | 0.21 L | PAG 46 | S | ||
| Air Cond Refrigerant | w/o Rear Unit | 2.25 LBS. | 1.02 KG | R-134a | S | ||
| Air Cond Refrigerant | w/Rear Unit | 3.13 LBS. | 1.41 KG | R-134a | S | ||
| Automatic Transmission Fluid | 4.00 QTS. | 3.78 L | Automatic Transmission Fluid Plus Type 7176 | S | |||
| Brake Fluid | N/A | N/A | DOT 3 Brake Fluid | S | |||
| Engine Coolant | 2.5L Eng | w/o Rear Heater | 9.50 QTS. | 8.99 L | PRESTONE II, PEAK, or antifreeze containing the ALUGARD 340-2 inhibitor system | Includes: 1 qt. in coolant reserve tank. | S |
| Engine Coolant | 2.5L Eng | w/Rear Heater | 10.50 QTS. | 9.93 L | PRESTONE II, PEAK, or antifreeze containing the ALUGARD 340-2 inhibitor system | Includes: 1 qt. in coolant reserve tank. | S |
| Engine Oil | w/Filter | 4.50 QTS. | 4.25 L | API - SAE 5W-30 (Below 100Deg.F), 10W-30 (Above 0Deg.F) | S | ||
| Engine Oil | w/o Filter | 4.00 QTS. | 3.78 L | API - SAE 5W-30 (Below 100Deg.F), 10W-30 (Above 0Deg.F) | S | ||
| Fuel Tank | 20.00 GALS. | 75.7 L | S | ||||
| Manual Transmission Fluid | 2.40 QTS. | 2.27 L | API - SG or SG/CD, SAE 5W-30 Engine Oil | S | |||
| Power Steering Fluid | N/A | N/A | Power Steering Fluid | DO NOT use Automatic Transmission Fluid. | S | ||
| Windshield Washer Fluid | N/A | N/A | Windshield Antifreeze | Not radiator antifreeze. Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.