Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM1992SHADOW ES, 2D HATCHBACK, 3.0 3, STANDARDREPAIR AND DIAGNOSISGENERAL INFORMATIONSTEERINGMAP - STEERING, SUSPENSION, WHEEL ALIGNMENT, WHEELS & TIRESSTEERING AND SUSPENSION, WHEEL ALIGNMENT, WHEELS AND TIRESDISTANCE REGULATION CONTROL MODULE
1992 Dodge and Ram Shadow ES, 2D Hatchback, 3.0 3, Standard
Distance Regulation Control Module
1992 Dodge and Ram Shadow ES, 2D Hatchback, 3.0 3, StandardSECTION Distance Regulation Control Module
| Condition | Code | Procedure |
|---|---|---|
| Attaching hardware broken | A | Require repair or replacement of hardware |
| Attaching hardware corroded, affecting structural integrity | A | Require replacement of hardware |
| Attaching hardware missing | C | Require replacement of hardware |
| Attaching hardware not functioning | A | Require repair or replacement of hardware |
| Attaching hardware threads damaged | A | Require repair or replacement of hardware |
| Attaching hardware threads stripped (threads missing) | A | Require replacement of hardware |
| Connector (Weatherpack type) leaking | A | Require repair or replacement |
| Connector broken | A | Require repair or replacement |
| Connector melted | A | Require replacement |
|
NOTE:
Determine cause and correct prior to replacement of part.
|
||
| Connector melted | A | Require repair or replacement |
|
NOTE:
Determine cause and correct prior to repair or replacement of part.
|
||
| Connector missing | C | Require replacement |
| Contaminated | A | Require repair or replacement |
|
NOTE:
Determine source of contamination, such as engine coolant, fuel, metal particles, or water. Require repair or replacement.
|
||
| Dust boot missing | C | Require replacement of boot |
|
NOTE:
If boot is not available separately, suggest replacement of sensor (reason code 2). This condition can lead to damage of the sliding magnet, which, in turn, causes premature sensor failure
|
||
| Dust boot split | A | Require replacement of boot |
|
NOTE:
If boot is not available separately, suggest replacement of sensor (reason code 2). This condition can lead to damage of the sliding magnet, which, in turn, causes premature sensor failure.
|
||
| Dust boot torn | A | Require replacement of boot |
|
NOTE:
If boot is not available separately, suggest replacement of sensor (reason code 2). This condition can lead to damage of the sliding magnet, which, in turn, causes premature sensor failure.
|
||
| Housing cracked | B | Require replacement |
| Inoperative | A | Require repair or replacement |
|
NOTE:
Inoperative includes intermittent operation. Some components may be serviceable; check for accepted cleaning procedure.
|
||
| Lead routing incorrect | B | Require rerouting according to vehicle manufacturer's specifications |
| Loose | B | Require adjustment to vehicle manufacturer's specifications |
| Malfunctioning | A | Require replacement |
|
NOTE:
includes inoperative, intermittent operation, failure to perform all functions, out of OEM specifications, or out of range.
|
||
| Missing | C | Require replacement |
| Output signal incorrect | B | Require repair or replacement |
| Terminal burned, affecting performance | A | Require repair or replacement |
|
NOTE:
Determine cause and correct prior to repair or replacement of part.
|
||
| Terminal burned, affecting performance | A | Require repair or replacement |
|
NOTE:
Determine cause and correct prior to repair or replacement of part.
|
||
| Terminal burned, not affecting performance | 2 | Suggest repair or replacement |
| Terminal corroded, affecting performance | A | Require repair or replacement |
| Terminal corroded, not affecting performance | 2 | Suggest repair or replacement |
| Terminal loose, affecting performance | B | Require repair or replacement |
| Terminal loose, not affecting performance | 1 | Suggest repair or replacement |
| Wire lead burned | A | Require repair or replacement |
| Wire lead conductors exposed | B | Require repair or replacement |
| Wire lead open | A | Require repair or replacement |
| Wire lead shorted | A | Require repair or replacement |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.