Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM1992CARAVAN FWD V6-201 3.3LREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER BLOCK ASSEMBLYSYSTEM SPECIFICATIONS
1992 Dodge and Ram Caravan FWD V6-201 3.3L
System Specifications
1992 Dodge and Ram Caravan FWD V6-201 3.3LSECTION System Specifications
CYLINDER BLOCK
Cylinder Bore (Standard) 93.0 mm (3.660 in.)
Maximum Cylinder Bore Out-of-Round 0.076 mm (0.003 in.)
Maximum Cylinder Bore Taper 0.051 mm (0.002 in.)
Reconditioning Working Limits
For Taper and Out-of-Round 0.001 in.
Maximum Allowable Oversize (Cylinder Bores) 0.020 in.
Tappet Bore Diameter 0.9051 - 0.9059 in.
Cylinder Bore (Standard) 93.0 mm (3.660 in.)
Maximum Cylinder Bore Out-of-Round 0.076 mm (0.003 in.)
Maximum Cylinder Bore Taper 0.051 mm (0.002 in.)
Reconditioning Working Limits
For Taper and Out-of-Round 0.001 in.
Maximum Allowable Oversize (Cylinder Bores) 0.020 in.
Tappet Bore Diameter 0.9051 - 0.9059 in.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.