Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM1992CARAVAN FWD V6-201 3.3LREPAIR AND DIAGNOSISRELAYS AND MODULESRELAYS AND MODULES - POWERTRAIN MANAGEMENTRELAYS AND MODULES - COMPUTERS AND CONTROL SYSTEMSENGINE CONTROL MODULESERVICE AND REPAIR
1992 Dodge and Ram Caravan FWD V6-201 3.3L
Engine Control Module: Service and Repair
1992 Dodge and Ram Caravan FWD V6-201 3.3LSECTION Service and Repair
Powertrain Control Module (PCM) And Data Link Connector:
Removal
1. Remove air cleaner duct or air cleaner PCM.
2. Remove battery.
3. Remove mounting screws.
4. Remove wiring connector from the PCM, and remove PCM.
Installation
1. Connect wiring connector to PCM.
2. Install PCM and tighten mounting screws.
3. Install battery and connect cables.
4. Connect air cleaner duct to PCM.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.