Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM1983RAMPAGE L4-135 2.2LREPAIR AND DIAGNOSISMAINTENANCESERVICE INTERVALSNORMAL SERVICE60000 MI OR 96000 KM
1983 Dodge and Ram Rampage L4-135 2.2L
60000 MI or 96000 KM
1983 Dodge and Ram Rampage L4-135 2.2LSECTION 60000 MI or 96000 KM
Lubricate
Parking Brake System
Body and Frame
Tighten/Torque
Wheel Stud / Lug Nut
Inspect
Universal Joint, Drive/Propeller Shaft
Manual Transmission/Transaxle
Check fluid level.
Drive Belt
Inspect and adjust. Warranty required except California models.
Differential Assembly
Check for leaks.
Ball Joint
Replace
Spark Plug
Vehicle without catalytic converter
Spark Plug
Oil Filter, Engine
Fluid - A/T
Change fluid and filter, adjust bands.
Engine Oil
If your mileage is less than 7,500 miles (12,000 km) yearly, replace the engine oil filter at each oil change.
Rotate
Tires
Flush
Carburetor
Clean choke shaft, fast idle cam and pivots.
Parking Brake System
Body and Frame
Tighten/Torque
Wheel Stud / Lug Nut
Inspect
Universal Joint, Drive/Propeller Shaft
Manual Transmission/Transaxle
Check fluid level.
Drive Belt
Inspect and adjust. Warranty required except California models.
Differential Assembly
Check for leaks.
Ball Joint
Replace
Spark Plug
Vehicle without catalytic converter
Spark Plug
Oil Filter, Engine
Fluid - A/T
Change fluid and filter, adjust bands.
Engine Oil
If your mileage is less than 7,500 miles (12,000 km) yearly, replace the engine oil filter at each oil change.
Rotate
Tires
Flush
Carburetor
Clean choke shaft, fast idle cam and pivots.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.