Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM1983RAMPAGE BASE, AUTOMATICREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 25 (SERVICING - A/T)LUBRICATIONCHECKING FLUID LEVELS
1983 Dodge and Ram Rampage Base, Automatic
Checking Fluid Levels
1983 Dodge and Ram Rampage Base, AutomaticSECTION Checking Fluid Levels
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 1989 Plymouth Sundance, 1989 Plymouth Reliant, 1989 Plymouth Horizon, 1989 Plymouth Acclaim, and 1989 Dodge Spirit. However, it is still accessible from the selected car via links, so may be relevant.
- With vehicle on level ground, apply parking brake and run engine at curb idle for at least 60 seconds. Gear selector through all positons, ending in Park.
- Fluid level should be in crosshatch area of dipstick marked "WARM" or "HOT", depending on fluid temperature. Check condition of fluid for contamination or burnt smell. Do not overfill. Fully seat dipstick.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.