Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHRYSLER2013TOWN & COUNTRY TOURING, GASREPAIR AND DIAGNOSISENGINE PERFORMANCETESTING & DIAGNOSIS3.6L - DTCS P0652 TO P2167DIAGNOSIS AND TESTINGP113E-O2 SENSOR 2/1 SLOW RESPONSE (HIGH FREQUENCY)WHEN MONITORED
2013 Chrysler Town & Country Touring, Gas
When Monitored
2013 Chrysler Town & Country Touring, GasSECTION When Monitored
With the ECT at least 60°C (140°F), engine RPM between 1000 and 2750, minimum engine run time of 20 seconds and Manifold Absolute Pressure (MAP) reading is between 21 - 96 Kpa (6.2 - 28.3 in Hg).
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.