Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2012 Chrysler 300 SRT-8FACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 6.10 OZS. | 0.18 L | PAG 46 | S | |||
| Air Cond Refrigerant | 1.56 LBS. | 0.7 KG | R-134a | S | |||
| Automatic Transmission Fluid | Trans Mfr CD NAG1-W5A580 | Overhaul | 8.10 QTS. | 7.66 L | MOPAR Automatic Transmission Fluid Plus 4 or equivalent licensed ATF+4 product | Dry fill capacity. Depending on type and size of Internal Cooler, length and inside diameter of Cooler Lines, or use of an Auxiliary Cooler, these figures may vary. | S |
| Automatic Transmission Fluid | Trans Mfr CD NAG1-W5A580 | Service Fill | 5.30 QTS. | 5.01 L | MOPAR Automatic Transmission Fluid Plus 4 or equivalent licensed ATF+4 product | S | |
| Brake Fluid | N/A | N/A | MORAR Brake Fluid DOT 3, SAE J1703 | If MOPAR Brake Fluid DOT 3 is not available, then MOPAR Brake and Clutch Fluid DOT 4 is acceptable. | S | ||
| Differential Gear Oil | 175mm FIA Front Axle | 0.63 QTS. | 0.59 L | MOPAR Synthetic Gear Oil, SAE 75W-90 | S | ||
| Differential Gear Oil | 200mm RII Rear Axle | 1.20 QTS. | 1.13 L | MOPAR Synthetic Gear Oil, SAE 75W-140 | S | ||
| Differential Gear Oil | 215mm RII Rear Axle | 1.30 QTS. | 1.23 L | MOPAR Synthetic Gear Oil, SAE 75W-140 | S | ||
| Differential Gear Oil | 226mm RII Rear Axle | 1.30 QTS. | 1.23 L | MOPAR Synthetic Gear Oil, SAE 75W-90 | Limited-Slip Rear Axles require the addition of 118 ml (4 oz.) MOPAR Limited Slip Additive. | S | |
| Engine Coolant | 6.4L Eng | 14.50 QTS. | 13.72 L | MOPAR Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent | Includes: heater and coolant recovery tank filled to "max" level. | S | |
| Engine Oil | 6.4L Eng | w/Filter | 7.00 QTS. | 6.62 L | API - SAE Full Synthetic 0W-40 engine oil | S | |
| Fuel Tank | 19.00 GALS. | 71.92 L | S | ||||
| Power Steering Fluid | SRT-8 | N/A | N/A | MOPAR Power Steering Fluid +4 material specification MS-9602 or equivalent | If MOPAR Power Steering Fluid +4 is not available, then MOPAR ATF +4 Automatic Transmission Fluid (P/N 05166226AA), is acceptable. | S | |
| Transfer Case Fluid | 2.11 PTS. | 0.99 L | MOPAR Transfer Case Lubricant for Borg Warner 44-40 | S | |||
| Windshield Washer Fluid | N/A | N/A | Windshield Antifreeze | Not radiator antifreeze. Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.