Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHRYSLER2010PT CRUISER L4-2.4LREPAIR AND DIAGNOSISINSTRUMENT PANEL, GAUGES AND WARNING INDICATORSDASHBOARD / INSTRUMENT PANELSERVICE AND REPAIRINSTRUMENT CLUSTER BEZEL - INSTALLATION
2010 Chrysler PT Cruiser L4-2.4L
Instrument Cluster Bezel - Installation
2010 Chrysler PT Cruiser L4-2.4LSECTION Instrument Cluster Bezel - Installation
INSTALLATION
NOTE: LHD model shown in illustration. RHD model similar.
NOTE: Steering column removed from illustration for clarity.
1. If removed, install the instrument panel air outlet onto the back of the cluster bezel Air Outlet - Installation.
2. Install the cluster bezel (1) onto the instrument panel (2). Make sure the snap retainers are fully engaged to the instrument panel.
3. Install the left instrument panel end cap Instrument Panel End Cap - Installation.
4. Install the steering column opening cover Steering Column Opening Cover - Installation.
5. Install the instrument panel top cover Instrument Panel Cover - Installation.
6. Reconnect the negative battery cable.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.