Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2008 Chrysler Sebring Limited, 2D ConvertibleFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 3.50 OZS. | 0.1 L | PAG 46 | S | |||
| Air Cond Refrigerant | 1.00 LBS. | 0.45 KG | R-134a | Approximate capacity. | S | ||
| Automatic Transmission Fluid | Trans Mfr CD 62TE | Overhaul,w/Torque Converter Empty | 9.00 QTS. | 8.51 L | Automatic Transmission Fluid Plus 4 or equivalent | Dry fill capacity. Depending on type and size of Internal Cooler, length and inside diameter of Cooler Lines, or use of an Auxiliary Cooler, these figures may vary. | S |
| Automatic Transmission Fluid | Trans Mfr CD 62TE | Service Fill | 5.50 QTS. | 5.2 L | Automatic Transmission Fluid Plus 4 or equivalent | S | |
| Brake Fluid | N/A | N/A | DOT 3 Brake Fluid | S | |||
| Engine Coolant | 3.5L Eng | 11.60 QTS. | 10.97 L | MOPAR Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent | Includes: heater and coolant recovery tank filled to "max" level. | S | |
| Engine Oil | 3.5L Eng | w/Filter | 5.50 QTS. | 5.2 L | API - SAE 10W-30 | Refer to the engine oil fill cap for the correct SAE grade. | S |
| Fuel Tank | 3.5L Eng | 16.90 GALS. | 63.97 L | S | |||
| Power Steering Fluid | N/A | N/A | Automatic Transmission Fluid Plus 4 or equivalent | Power Steering Fluid capacities are dependent on Engine/chassis options as well as Steering Gear/Cooler options. Depending on type and size of Internal Cooler, length and inside diameter of Cooler Lines, or use of an Auxiliary Cooler, these capacities may vary. | S | ||
| Windshield Washer Fluid | 2.40 QTS. | 2.27 L | Windshield Antifreeze | Not radiator antifreeze. Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.