Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2008 Chrysler Sebring Limited, 2D ConvertibleFACTORY OEM SERVICE PROCEDURE
Specifications - Torque
TORQUE SPECIFICATIONS
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. |
|---|---|---|---|
| Air Pump Heat Shield Mounting Bolts | 8 | - | 71 |
| Air Pump to Bracket Mounting Nuts | 8 | - | 71 |
| EGR Tube to EGR Valve Bolts 2.7L | 12 | - | 106 |
| EGR Tube to EGR Valve Bolts 3.5L | 12 | - | 106 |
| EGR Tube to Exhaust Manifold 2.7L | 70 | 51.5 | - |
| EGR Tube to Intake Manifold Bolts 2.7L | 6 | - | 53 |
| EGR Tube to Intake Manifold Bolts 3.5L | 6 | - | 53 |
| EGR Valve to Cylinder Head Bolts 2.7L, 3.5L | 30 | 22 | - |
| Positive Crankcase Ventilation (PCV) Valve 2.7L, 3.5L | 4 | - | 35 |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.