2008 Chrysler PT Cruiser L4-2.4LFACTORY OEM SERVICE PROCEDURE

Steering Mounted Controls Communication Module




Component ID: 176
Component : MODULE-STEERING CONTROL

Connector:
Name : MODULE-STEERING CONTROL C1
Color :
# of pins : 4
Factory service manual diagram




Pin Circuit Description
1 Z906 20BK GROUND
2 A411 20RD FUSED B(+) (I.O.D.)
3 D506 20WT/DG LIN BUS
4 F20 20PK/WT IGNITION SWITCH OUTPUT (RUN-START)

Component Location - 27
Factory service manual diagram




Component Location - 35
Factory service manual diagram






Connector:
Name : MODULE-STEERING CONTROL C2
Color :
# of pins : 6
Factory service manual diagram




Pin Circuit Description
1 - -
2 Y13 20YL/BK RADIO CONTROL RETURN
2 Y13 20VT/BK RADIO CONTROL RETURN
3 X3 20DG/VT HORN SWITCH SENSE
4 V72 20OR/VT S/C SWITCH NO. 2 SIGNAL
5 V937 20VT/BR S/C SWITCH RETURN
6 V71 20VT/OR S/C SWITCH NO. 1 SIGNAL

Component Location - 27
Factory service manual diagram




Component Location - 35
Factory service manual diagram






Connector:
Name : MODULE-STEERING CONTROL C4
Color :
# of pins : 4
Factory service manual diagram




Pin Circuit Description
1 R63 20LG/WT DRIVER SQUIB 2 LINE 1
2 R61 20LG/VT DRIVER SQUIB 2 LINE 2
3 R45 20LG/OR DRIVER SQUIB 1 LINE 1
4 R43 20LG/BR DRIVER SQUIB 1 LINE 2

Component Location - 27
Factory service manual diagram




Component Location - 35
Factory service manual diagram






Connector:
Name : MODULE-STEERING CONTROL C5
Color : WHITE
# of pins : 6
Factory service manual diagram




Pin Circuit Description
1 - -
2 X3 20BK HORN SWITCH SENSE
3 Y13 20BK RADIO CONTROL RETURN
4 V72 20OR/VT S/C SWITCH NO. 2 SIGNAL
5 V71 20RD S/C SWITCH NO. 1 SIGNAL
6 V937 20GY S/C SWITCH RETURN

Component Location - 27
Factory service manual diagram




Component Location - 35
Factory service manual diagram






Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.