2008 Chrysler PT Cruiser L4-2.4LFACTORY OEM SERVICE PROCEDURE

Switch-Window-Front




Component ID: 392
Component : SWITCH-WINDOW-FRONT

Connector:
Name : SWITCH-WINDOW-FRONT
Color : BLACK
# of pins : 14
Factory service manual diagram




Pin Circuit Description
1 Q412 14OR/BK RIGHT REAR WINDOW DRIVER (UP)
2 Q612 14OR/DB RIGHT REAR WINDOW DRIVER (DOWN)
3 Q22 14VT/WT RIGHT FRONT WINDOW DRIVER (DOWN)
4 Z908 14BK GROUND
5 Q15 14OR/LB WINDOW LOCK OUT SWITCH OUTPUT
6 E12 20OR/GY PANEL LAMPS DRIVER
7 Q12 14BR/LB RIGHT FRONT WINDOW DRIVER (UP)
8 Q411 14OR/WT LEFT REAR WINDOW DRIVER (UP)
9 Q611 14OR/GY LEFT REAR WINDOW DRIVER (DOWN)
10 D506 20WT/DG LIN BUS
11 Z908 20BK GROUND
12 F981 16PK/YL FUSED IGNITION SWITCH OUTPUT (RUN-ACC)
12 F981 18PK/YL FUSED IGNITION SWITCH OUTPUT (RUN-ACC)
12 F981 14PK/YL FUSED IGNITION SWITCH OUTPUT (RUN-ACC)
13 Q21 14WT LEFT FRONT WINDOW DRIVER (DOWN)
14 Q11 14LB LEFT FRONT WINDOW DRIVER (UP)

Component Location - 30
Factory service manual diagram






Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.