Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DBβ LIVE
HOMESERVICE MANUALSCHRYSLER2007ASPEN 2WD V8-4.7L FLEX FUELREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER BLOCK ASSEMBLYSYSTEM SPECIFICATIONS
2007 Chrysler Aspen 2WD V8-4.7L Flex Fuel
System Specifications
2007 Chrysler Aspen 2WD V8-4.7L Flex FuelSECTION System Specifications
General Description:
General Description
Cylinder Block:
Cylinder Block
Pistons:
Pistons
Piston Pins:
Piston Pins
Piston Rings:
Piston Rings
Connecting Rods:
Connecting Rods
Crankshaft:
Crankshaft
Connecting Rod cap - bolts 27 Nm (20 ft. lbs.) Plus 90° TURN
Crankshaft Damper-bolt 175 Nm (130 ft. lbs.)
Bed Plate Bolts
Tighten bolts A - L to 54 Nm (40 ft. lbs.)
Tighten bolts 1 - 10 to 2.8 Nm (25 in. lbs.)
Turn bolts 1 - 10 an additional 90οΏ½.
Tighten bolts A1 - A6 to 27 Nm (20 ft. lbs.)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.