Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DBβ LIVE
HOMESERVICE MANUALSCHRYSLER2007ASPEN 2WD V8-4.7L FLEX FUELREPAIR AND DIAGNOSISDIAGRAMSCONNECTOR VIEWSPOWER WINDOW SWITCHSWITCH-WINDOW/DOOR LOCK-DRIVER
2007 Chrysler Aspen 2WD V8-4.7L Flex Fuel
Switch-Window/Door Lock-Driver
2007 Chrysler Aspen 2WD V8-4.7L Flex FuelSECTION Switch-Window/Door Lock-Driver
Component ID: 453
Component : SWITCH-WINDOW/DOOR LOCK-DRIVER
Connector:
Name : SWITCH-WINDOW/DOOR LOCK-DRIVER C1
Color : GRAY
# of pins : 8
Pin Description Circuit
1 FUSED ACCESSORY DELAY RELAY OUTPUT F30 14PK/YL
2 MASTER WINDOW SWITCH LEFT REAR (DOWN) Q611 14DB/PK
3 MASTER WINDOW SWITCH LEFT REAR (UP) Q411 14DB/LG
4 MASTER WINDOW SWITCH RIGHT REAR (DOWN) Q612 14DB/OR
5 WINDOW LOCK OUT SWITCH OUTPUT Q15 14OR/LB
6 GROUND Z940 20BK/LG
7 - -
8 MASTER WINDOW SWITCH RIGHT REAR (UP) Q412 14TN/WT
Component Location - 50
Connector:
Name : SWITCH-WINDOW/DOOR LOCK-DRIVER C2
Color :
# of pins : 6
Qualifier : (MEMORY)
Pin Description Circuit
1 MASTER SWITCH LEFT FRONT WINDOW MUX Q221 20DB
2 MASTER SWITCH RIGHT FRONT WINDOW MUX Q222 20OR/GY
3 LEFT DOOR LOCK SWITCH MUX G161 20LB/OR
4 DRIVER EXPRESS WINDOW SWITCH RETURN Q994 20OR
5 LEFT DOOR LOCK SWITCH RETURN G775 20OR/VT
6 - -
Component Location - 50
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.