Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHRYSLER2007ASPEN 2WD V8-4.7L FLEX FUELREPAIR AND DIAGNOSISDIAGRAMSCONNECTOR VIEWSC300 - C399C301
2007 Chrysler Aspen 2WD V8-4.7L Flex Fuel
C301
2007 Chrysler Aspen 2WD V8-4.7L Flex FuelSECTION C301
Component ID: 36
Component : C301
Connector:
Name : C301
Color : BLACK
# of pins : 16
Gender : FEMALE
Pin Description Circuit
1 PASSENGER SEAT HEATER B(+) DRIVER A957 16RD
2 DRIVER SEAT POSITION SENSOR VOLTAGE P188 18BR/VT
3 INVERTER STATUS INDICATOR DRIVER P806 20LG/VT
4 110 VOLT AC LINE 1 P801 20LG
5 - -
6 - -
7 - -
8 GROUND Z975 14BK
9 Z920 16BK
10 GROUND Z972 20BK/LG
11 INVERTER ENABLE SWITCH SIGNAL P805 20LG/RD
12 110 VOLT AC LINE 2 P802 20LG/BK
13 - -
14 - -
15 - -
16 FUSED B(+) A940 12RD/GY
Component Location - 46
Connector:
Name : C301
Color : BLACK
# of pins : 16
Gender : MALE
Pin Description Circuit
1 PASSENGER SEAT HEATER B(+) DRIVER P188 18LG/VT
2 DRIVER SEAT POSITION SENSOR VOLTAGE R263 20LB/VT
3 INVERTER STATUS INDICATOR DRIVER P806 20LG/VT
4 110 VOLT AC LINE 1 P801 20LG
5 DRIVER SEAT POSITION SENSOR DATA R262 20WT/LB
6 - -
7 - -
8 GROUND Z975 16BK
9 GROUND Z972 16BK/LG
9 GROUND Z920 20BK
10 GROUND Z972 20BK/LG
10 GROUND Z972 20BK
11 INVERTER ENABLE SWITCH SIGNAL P805 20LG/RD
12 110 VOLT AC LINE 2 P802 20LG/BK
13 - -
14 - -
15 - -
16 FUSED B(+) A940 12RD
Component Location - 46
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.