Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2007 Chrysler 300 BaseFACTORY OEM SERVICE PROCEDURE
Power Steering Fastener Torque
TORQUE SPECIFICATIONS
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. |
|---|---|---|---|
| DASH SEAL MOUNTING NUTS | 7 | - | 62 |
| GEAR MOUNTING BOLTS - AWD | 102 | 75 | - |
| GEAR MOUNTING BOLTS - RWD | 95 | 70 | - |
| HOSE TUBE NUTS | 47 | 35 | - |
| OUTER TIE ROD BALL JOINT NUT | 85 | 63 | - |
| PUMP MOUNTING BOLTS - 2.7L/3.5L/5.7L/6.1L | 28 | 21 | - |
| PUMP MOUNTING BOLTS - 3.0L DIESEL | 24 | 17 | 212 |
| PUMP MOUNTING BRACKET BOLTS - 3.0L DIESEL | 24 | 17 | 212 |
| STEERING COUPLING PINCH BOLT - AT GEAR | 54 | 40 | - |
| STEERING COUPLING PINCH BOLT - AT UPPER COUPLING/INTERMEDIATE SHAFT | 31 | 23 | - |
| STEERING INTERMEDIATE SHAFT PINCH BOLT - AT RHD COLUMN | 31 | 23 | - |
| TIE ROD HEAT SHIELD - AWD | 10 | 7 | 89 |
| TIE ROD JAM NUT | 75 | 55 | - |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
