Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHRYSLER2005SEBRING LIMITED, 4D SEDAN, 2.7 TREPAIR AND DIAGNOSISHEATING, VENTILATION & A/C (HVAC)HVAC CONTROL SYSTEMSBODY DIAGNOSTIC PROCEDURES - EXCEPT COUPESYSTEM DESCRIPTION AND FUNCTIONAL OPERATIONCOMPASS/MINI-TRIP COMPUTERDIAGNOSIS AND TESTINGAMBIENT TEMPERATURE SENSOR TEST
2005 Chrysler Sebring Limited, 4D Sedan, 2.7 T
Ambient Temperature Sensor Test
2005 Chrysler Sebring Limited, 4D Sedan, 2.7 TSECTION Ambient Temperature Sensor Test
- Turn the ignition OFF.
- Disconnect the ATS harness connector.
- Measure the resistance of the ATS using the following min/max values:
- 0°C (32°F) Sensor Resistance = 29.33 - 35.99 Kilohms
- 10°C (50°F) Sensor Resistance = 17.99 - 21.81 Kilohms
- 20°C (68°F) Sensor Resistance = 11.37 - 13.61 Kilohms
- 25°C (77°F) Sensor Resistance = 9.12 - 10.86 Kilohms
- 30°C (86°F) Sensor Resistance = 7.37 - 8.75 Kilohms
- 40°C (104°F) Sensor Resistance = 4.90 - 5.75 Kilohms
The sensor resistance should read between these min/max values. If the resistance values are no OK, replace the Sensor.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.