Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHRYSLER2005SEBRING CONVERTIBLE V6-2.7L VIN RREPAIR AND DIAGNOSISBODY AND FRAMEBODY CONTROL SYSTEMSBODY CONTROL MODULEDESCRIPTION AND OPERATIONFUNCTIONAL OPERATIONEXTERIOR LIGHTING SYSTEM
2005 Chrysler Sebring Convertible V6-2.7L VIN R
Exterior Lighting System
2005 Chrysler Sebring Convertible V6-2.7L VIN RSECTION Exterior Lighting System
EXTERIOR LIGHTING SYSTEM
HEADLAMP DELAY
The headlamp time delay operates when the ignition switch is turned off while the headlamps are still on, and the headlamps are then turned off within 45 seconds after the ignition is off. This will provide a 90-second time delay before turning off the headlamps.
HEADLAMP DELAY
The headlamp time delay operates when the ignition switch is turned off while the headlamps are still on, and the headlamps are then turned off within 45 seconds after the ignition is off. This will provide a 90-second time delay before turning off the headlamps.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.