2005 Chrysler Pacifica LimitedFACTORY OEM SERVICE PROCEDURE

Compass Mini-Trip Computer: Installation

  1. Position the CMTC module in the overhead console and connect the electrical connector.
  2. Install the screws holding the CMTC module in the overhead console.
  3. Install the overhead console. (Refer to ELECTRICAL/OVERHEAD CONSOLE - INSTALLATION)Β .
  4. Connect the battery negative cable.
NOTE: If the CMTC module is being replaced, the tire pressure monitoring system must be retrained. Refer to TIRES/WHEELS for detailed instructions.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.