Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Extreme Temperature / Open Or Short Circuit Condition
If the measured outside temperature is more than 60°C (140°F) or the ATS sense circuit is shorted to ground, the temp display will be 60°C (140°F) to indicate a short circuit condition.
If the measured outside temperature is less than -45°C (-49°F) or the ATS sense circuit is open, the temp display will be -45°C (-49°F) to indicate an open circuit condition.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.