Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHRYSLER2005CROSSFIRE SRT-6 V6-3.2L SC VIN NREPAIR AND DIAGNOSISSPECIFICATIONSELECTRICAL SPECIFICATIONSKEYLESS ENTRY TRANSMITTER
2005 Chrysler Crossfire SRT-6 V6-3.2L SC VIN N
Keyless Entry Transmitter
2005 Chrysler Crossfire SRT-6 V6-3.2L SC VIN NSECTION Keyless Entry Transmitter
BATTERY TESTING
The batteries in the Remote Keyless Entry Transmitter can be tested by pressing and holding both the lock and unlock buttons simultaneously for more than one second. The batteries are charged sufficiently if the LED next to the ignition key blade lights up briefly.
BATTERY REPLACEMENT
The transmitter has two 3 volt batteries, which can be removed and replaced without special tools. First, release the key from the closed position; then insert a coin in the side slot of the transmitter and twist. The cover should separate from the body of the transmitter where the batteries are stacked on top of each other. The batteries are available at local retail stores. Recommended replacement batteries are Panasonic TCR 2025 lithium or equivalent. Battery life for normal use is about two years.
NOTE: The transmitter MUST be reprogrammed after the batteries are replaced.
TRANSMITTER RANGE
Operation range is within 20 meters (66 feet) of the module/receiver.
The batteries in the Remote Keyless Entry Transmitter can be tested by pressing and holding both the lock and unlock buttons simultaneously for more than one second. The batteries are charged sufficiently if the LED next to the ignition key blade lights up briefly.
BATTERY REPLACEMENT
The transmitter has two 3 volt batteries, which can be removed and replaced without special tools. First, release the key from the closed position; then insert a coin in the side slot of the transmitter and twist. The cover should separate from the body of the transmitter where the batteries are stacked on top of each other. The batteries are available at local retail stores. Recommended replacement batteries are Panasonic TCR 2025 lithium or equivalent. Battery life for normal use is about two years.
NOTE: The transmitter MUST be reprogrammed after the batteries are replaced.
TRANSMITTER RANGE
Operation range is within 20 meters (66 feet) of the module/receiver.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.