Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHRYSLER2005CROSSFIRE LIMITED, 2D COUPE, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE PERFORMANCETESTING & DIAGNOSISDTCS P0174 TO P0302DIAGNOSIS AND TESTING(P0222) APPS SIGNAL 2 CIRCUIT LOWWHEN MONITORED AND SET CONDITION
2005 Chrysler Crossfire Limited, 2D Coupe, Standard
When Monitored and Set Condition
2005 Chrysler Crossfire Limited, 2D Coupe, StandardSECTION When Monitored and Set Condition
- When Monitored: With the ignition on and no other Accelerator Pedal Position (APP) Sensor 2 DTCs present.
- Set Condition: When the APP Sensor Signal 2 voltage is too low. Engine will only idle if the brake pedal is pressed or has failed. Acceleration rate and engine output are limited.
| Possible Causes |
|---|
| ACCELERATOR PEDAL POSITION SENSOR SIGNAL 2 CIRCUIT OPEN |
| ACCELERATOR PEDAL POSITION SENSOR SIGNAL 2 CIRCUIT SHORT TO GROUND |
| ACCELERATOR PEDAL POSITION SENSOR SIGNAL 2 CIRCUIT SHORT TO SENSOR GROUND CIRCUIT |
| ACCELERATOR PEDAL POSITION SENSOR |
| POWERTRAIN CONTROL MODULE |
For a complete Powertrain Control Module Circuit Diagram, (Refer to ENGINE - SCHEMATICS AND DIAGRAMS) .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.