Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHRYSLER2005CROSSFIRE LIMITED, 2D COUPE, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE MECHANICALACCESSORY DRIVE BELTSENGINE COOLING SYSTEM & AUTOMATIC TRANSMISSION COOLING SYSTEMENGINERADIATOR FANREMOVAL
2005 Chrysler Crossfire Limited, 2D Coupe, Standard
Radiator Fan: Removal
2005 Chrysler Crossfire Limited, 2D Coupe, StandardSECTION Removal
- Disconnect the negative battery cable.
- Disconnect the radiator fan harness connector (1).
- Remove the coolant return hose (1) from the mounting bracket (2).
- Using a suitable tool, grasp the radiator fan hold down clamps (2) and pull up to remove the clamps from the mounting holes.
- Carefully pry the upper radiator hose and return hoses away from the cooling fan.
- Gently lift the radiator fan up and out of the vehicle.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.