SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHRYSLER2005CROSSFIRE LIMITED, 2D COUPE, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)ELECTRICALBODY ELECTRICALCONNECTOR END VIEWSCONNECTOR PIN-OUTSPOWERTRAIN CONTROL MODULE CONNECTOR END VIEW (C2)
2005 Chrysler Crossfire Limited, 2D Coupe, Standard

Powertrain Control Module Connector End View (C2)

2005 Chrysler Crossfire Limited, 2D Coupe, StandardSECTION Powertrain Control Module Connector End View (C2)
POWERTRAIN CONTROL MODULE C2 - BLACK 24 WAY

GCZH580190Courtesy of DAIMLERCHRYSLER CORP.
CAV CIRCUIT FUNCTION
1 - -
2 - -
3 - -
4 - -
5 - -
6 - -
7 20GY/WT (EXCEPT SRT) EGR SOLENOID CONTROL
8 - -
9 18BL/WT (SRT) GENERATOR CONTROL
10 - -
11 - -
12 18VT/WT COIL ON PLUG DRIVER NO. 5
13 20GY/BR AIR PUMP SWITCHOVER SOLENOID CONTROL
14 20DG/VT (EXCEPT SRT) SHORT RUNNER VALVE SOLENOID CONTROL
15 18BR/GY (EXCEPT SRT) OXYGEN SENSOR 1/1 HEATER CONTROL
15 18BR/BK (SRT) OXYGEN SENSOR 1/1 HEATER CONTROL
16 - -
17 - -
18 18GY/VT FUEL INJECTOR NO. 6 CONTROL
19 18GY/DG FUEL INJECTOR NO. 3 CONTROL
20 - -
21 18GY/YL FUEL INJECTOR NO. 5 CONTROL
22 18GY/RD FUEL INJECTOR NO. 2 CONTROL
23 - -
24 18BR/BK (EXCEPT SRT) OXYGEN SENSOR 2/1 HEATER CONTROL
24 18BR/GY (SRT) OXYGEN SENSOR 2/1 HEATER CONTROL
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.