Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2005 Chrysler 300 BaseFACTORY OEM SERVICE PROCEDURE
Ignition Control: Specifications: Torque
WARNING: This page is about a different car, the 2004 Dodge Pickup and 2004 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. | ||||
|---|---|---|---|---|---|---|---|
| Camshaft Position Sensor -3.7L V-6 Engine | 12 | - | 106 | ||||
| Camshaft Position Sensor - 4.7L V-8 Engine | 12 | - | 106 | ||||
| Camshaft Position Sensor - 5.7L V-8 Engine | 12 | 9- | 105 | ||||
| Camshaft Position Sensor - 8.3L Engine | 10.7 | - | 95 | ||||
| Crankshaft Position Sensor - 3.7L V-6 Engine | 28 | 21 | 205 | ||||
| Crankshaft Position Sensor - 4.7L V-8 Engine | 28 | 21 | 205 | ||||
| Crankshaft Position Sensor - 5.7L V-8 Engine | 12 | 9 | 105 | ||||
| Crankshaft Position Sensor - 8.3L Engine | 10.7 | - | 95 | ||||
| Ignition Coil Mounting - 3.7L V-6 Engine | 8 | - | 70 | ||||
| Ignition Coil Mounting - 4.7L V-8 Engine | 8 | - | 70 | ||||
| Ignition Coil Mounting - 5.7L V-8 Engine | 12 | 9 | 105 (+/-20) | ||||
| Ignition Coil to Cyl. Head Screws 8.3L Engine | 10.7 | - | 95 | ||||
| (1) Knock Sensor - 3.7L V-6 Engine | 20 | 15 | 176 | ||||
| (1) Knock Sensor - 4.7L V-8 Engine | 20 | 15 | 176 | ||||
| (1) Knock Sensor - 5.7L V-8 Engine | 20 | 15 | 176 | ||||
| Spark Plugs - 3.7L V-6 Engine | 27 | 20 | - | ||||
| Spark Plugs - 4.7L V-8 Engine | 27 | 20 | - | ||||
| (2) Spark Plugs - 5.7L V-8 Engine | 18 (+/-3) | 13 (+/-2) | - | ||||
| Spark Plugs - 8.3L Engine | 27 | 20 | - | ||||
|
|||||||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
