SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHRYSLER2004PT CRUISER TOURING, 2.4 B, AUTOMATICREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 67 (FUEL DELIVERY SYSTEM)FUEL LEVEL SENDING UNIT / SENSORREMOVAL
2004 Chrysler PT Cruiser Touring, 2.4 B, Automatic

Fuel Level Sending Unit / Sensor: Removal

2004 Chrysler PT Cruiser Touring, 2.4 B, AutomaticSECTION Removal
WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.

Remove fuel pump module. Refer to FUEL PUMP MODULE .

  1. Depress the retaining tab and remove the fuel pump/level sensor connector from the bottom of the fuel pump module electrical connector (Fig 1).
    Fig 1: Fuel Pump/Level Sensor Connector
    G03498649Courtesy of DAIMLERCHRYSLER CORP.
  2. Remove wire terminal retaining clip from connector (Fig 2). Note the location of terminals for the level sensor wires (Fig 3).
    Fig 2: Wire Terminal Retaining Clip
    G03498650Courtesy of DAIMLERCHRYSLER CORP.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.