Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHRYSLER2004PT CRUISER TOURING, 2.4 B, AUTOMATICREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 29 (ELECTRICAL COMPONENT LOCATOR)CONNECTORS
2004 Chrysler PT Cruiser Touring, 2.4 B, Automatic
Section 29 (Electrical Component Locator): Connectors
2004 Chrysler PT Cruiser Touring, 2.4 B, AutomaticSECTION Connectors
WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
CONNECTORS LOCATION
| Component | Location |
|---|---|
| C101 (2.7L) (Black, 19 Pin) | At left front of engine. See Figure. |
| C101 (3.5L) (Black, 19 Pin) | At left front of engine. See Figure. |
| C103 (Green, 22 Pin) | At left side of dash. See Figure. |
| C104 (Orange, 4 Pin) | At left side of dash. See Figure. |
| C105 (Yellow, 3 Pin) | At left side of dash. See Figure. |
| C106 (Natural, 10 Pin) | At left side of dash. See Figure. |
| C107 (Light Gray, 14 Pin) | At rear of engine. See Figure. |
| C108 (Light Gray, 10 Pin) | At rear of engine. See Figure. |
| C109 (Black, 6 Pin) | Under left front headlamp. See Figure. |
| C111 (Gray, 6 Pin) | Near left headlamp. See Figure. |
| C112 (Gray, 6 Pin) | Near left headlamp. See Figure. |
| C115 (Black, 4 Pin) | At front of engine compartment. |
| C120 (2 Pin) | Behind left side of dash. |
| C200 (Blue, 22 Pin) | At left side of dash. See Figure. |
| C201 (Natural, 13 Pin) | At right side of dash. See Figure. |
| C202 (MTC) (Natural, 16 Pin) | At lower center of dash. See Figure. |
| C203 (ATC) (Natural, 16 Pin) | At lower center of dash. See Figure. |
| C204 (Natural, 6 Pin) | At headliner. |
| C205 (Except Police Package) (Natural, 4 Pin) | Near cigar lighter. See Figure. |
| C206 (Natural, 2 Pin) | At left side of dash. |
| C300 (Natural, 24 Pin) | Behind left kick panel. See Figure. |
| C301 (Natural, 16 Pin) | Behind left kick panel. See Figure. |
| C302 (Natural, 16 Pin) | Behind right kick panel. See Figure. |
| C303 (Natural, 16 Pin) | Behind right kick panel. See Figure. |
| C304 (Natural, 10 Pin) | At left "B" pillar. See Figure. |
| C305 (Natural, 10 Pin) | At right "B" pillar. See Figure. |
| C306 (Black, 2 Pin) | Under passenger's seat. See Figure. |
| C307 (Black/Green, 2 Pin) | Under driver's seat. See Figure. |
| C308 (Black, 6 Pin) | Under rear seat. See Figure. |
| C309 (Yellow, 2 Pin) | Under driver's seat. See Figure. |
| C310 (Yellow, 2 Pin) | Under passenger's seat. See Figure. |
| C311 (Red, 6 Pin) | Left trunk area. See Figure. |
| C312 (Black, 2 Pin) | Left trunk area. See Figure. |
| C313 (Gray, 6 Pin) | Right trunk area. See Figure. |
| C314 (Gray, 6 Pin) | Left trunk area. See Figure. |
| C315 (Black, 3 Pin) | Left trunk area. See Figure. |
| C316 (Black, 12 Pin) | At left "B" pillar. See Figure. |
| C318 (Natural, 8 Pin) | Under passenger's seat. See Figure. |
| C319 (Natural, 22 Pin) | Under driver's seat. See Figure. |
| C320 (Natural, 2 Pin) | At left side shelf panel. See Figure. |
| C321 (Black, 2 Pin) | On deck lid. See Figure. |
| C322 (Black, 3 Pin) | At left "B" pillar. See Figure. |
| C325 (Auxiliary Lighting) (Light Green, 2 Pin) | At left "C" pillar, behind shoulder belt anchor. See Figure. |
| C360 (Black, 6 Pin) | At bottom of dash center stack. See Figure. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.