SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHRYSLER2004PT CRUISER TOURING, 2.4 B, AUTOMATICREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 28 (COMMON SPECS & PROCEDURES)STARTING SYSTEMSTARTERSERVICE SPECIFICATIONS
2004 Chrysler PT Cruiser Touring, 2.4 B, Automatic

Service Specifications

2004 Chrysler PT Cruiser Touring, 2.4 B, AutomaticSECTION Service Specifications
WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
STARTER APPLICATIONS

Model Type
Concorde, Intrepid & 300M
  2.7L Melco
  3.5L Nippondenso
STARTING SYSTEM SERVICE SPECIFICATIONS

Application Specification
Cranking Amperage Draw(1) 150-280 Amps
No-Load Test At 11 Volts
  Maximum Amps
    Melco 2.7L (2)
    Nippondenso 3.5L (2)
  Minimum RPM
    Melco 2.7L (2)
    Nippondenso 3.5L (2)
Power Rating
  Melco 2.7L 1.4 Kw
  Nippondenso 3.5L 1.4 Kw
(1) With engine at normal operating temperature. High viscosity oil, extreme cold temperatures, or an engine with tight piston ring-to-cylinder clearance will increase amperage draw.
(2) Information is not available from manufacturer.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.