SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHRYSLER2004PT CRUISER TOURING, 2.4 B, AUTOMATICREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 27 (COMMON SPECS & PROCEDURES)AIR CONDITIONINGAUTOMATIC SYSTEMSERVICE SPECIFICATIONS
2004 Chrysler PT Cruiser Touring, 2.4 B, Automatic

Service Specifications

2004 Chrysler PT Cruiser Touring, 2.4 B, AutomaticSECTION Service Specifications
WARNING: This page is about a different car, the 2003 Dodge Intrepid, 2003 Chrysler Intrepid, 2003 Chrysler Concorde, and 2003 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
SPECIFICATIONS

Application Specification
Compressor Type Nippondenso 10PA17
Compressor Belt Tension
2.7L (1)
3.5L (2)
New Belt 150-170 lbs. (68.04-77.11 kg)
Used Belt 120 lbs. (54.43)
System Oil Capacity (3) 5.0 ozs. (.15L)
Refrigerant (R-134a) Capacity 25.0 ozs. (.74L)
System Operating Pressures (4)
High Side 210-250 psi (14.8-17.6 kg/cm2 )
Low Side 20-30 psi (1.4-2.1 kg/cm2 )
(1) See BELT ADJUSTMENT in appropriate ENGINE COOLING article under ENGINES.
(2) Measured with Belt Tension Gauge (7198).
(3) Use ND-8 PAG refrigerant oil.
(4) With ambient temperature at 80°F (27°C).
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.