Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHRYSLER2004PT CRUISER TOURING, 2.4 B, AUTOMATICREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTWIPER/WASHER SYSTEMSWIPER SYSTEM & WASHER SYSTEMFRONT WIPER SWITCHINSTALLATION
2004 Chrysler PT Cruiser Touring, 2.4 B, Automatic
Front Wiper Switch: Installation
2004 Chrysler PT Cruiser Touring, 2.4 B, AutomaticSECTION Installation
To service the front wiper/washer switch, the multi-function switch must first be removed.
- Place new wiper/washer switch next to the multi-function switch and install two screws.
- Place the multi-function switch into place and install the two mounting screws. See Figure . Torque multi-function switch to column retaining screws to 3 N.m (27 in. lbs.).
- Connect both posi-lock harness connectors at the rear of the multi-function switch and front wiper/washer switch. See Figure .
- Install both upper and lower steering column shrouds. See STEERING COLUMN .
- Connect the battery negative cable.
- Close hood.
- Verify vehicle and system operation.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.