Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHRYSLER2004PT CRUISER TOURING, 2.4 B, AUTOMATICREPAIR AND DIAGNOSIS (SINGLE PAGE)BODY & FRAMEDOOR LOCKSPOWER DOOR LOCK SYSTEM & KEYLESS ENTRY SYSTEMREMOTE KEYLESS ENTRY MODULEREMOVAL
2004 Chrysler PT Cruiser Touring, 2.4 B, Automatic
Remote Keyless Entry Module: Removal
2004 Chrysler PT Cruiser Touring, 2.4 B, AutomaticSECTION Removal
- Disconnect and isolate the battery negative cable.
- Remove the instrument panel top cover.
- Remove the two screws holding the RKE module to the instrument panel assembly.
- Slide locking tab of the wiring connector sideways to unlock tab, and remove connector from RKE module.
- Remove RKE module from vehicle.
NOTE:
When replacing a faulty RKE Module, the replacement module must be configured with the DRB lll(R) scan tool for proper operation. Refer to Vehicle Theft/Security Systems, Configuring a New Module under Service Procedures. Additionally, all transmitters must be reprogrammed to the new RKE module.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.