Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHRYSLER2004CROSSFIRE STANDARDREPAIR AND DIAGNOSISBRAKESANTI-LOCK BRAKESANTI-LOCK BRAKE SYSTEM (SERVICE INFORMATION)FRONT WHEEL SPEED SENSORINSTALLATION
2004 Chrysler Crossfire Standard
Front Wheel Speed Sensor: Installation
2004 Chrysler Crossfire StandardSECTION Installation
- Connect the wheel speed sensor/brake wear indicator wire harness connector (2) to the body mount connector (1).
- Install the wheel speed sensor (1) to the steering knuckle.
- Install the bolts (2) attaching the flange to the steering knuckle. Tighten to 12 N.m (106 in. lbs.).
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.