Steering Column Cover

2004 Chrysler 300M Special V6-3.5L VIN KSECTION Steering Column Cover
REMOVAL
1. Remove the left end cover.

Steering Column Cover:




2. Remove two screws attaching steering column cover.
3. Pull rearward on steering column cover to release the retaining dips on the top and right edge.

INSTALLATION
1. Place steering column cover into position.
2. Push on steering column cover till retaining dips lock into position.
3. Install two attaching screws to the side of the steering column cover.
4. Install end cover.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.