Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHRYSLER2003CONCORDE V6-3.5L VIN MREPAIR AND DIAGNOSISSPECIFICATIONSCAPACITY SPECIFICATIONSAUTOMATIC TRANSMISSION/TRANSAXLESYSTEM SPECIFICATIONS
2003 Chrysler Concorde V6-3.5L VIN M
System Specifications
2003 Chrysler Concorde V6-3.5L VIN MSECTION System Specifications
42LE AUTOMATIC TRANSAXLE
DIFFERENTIAL FLUID
Type Mopar Fuel Saving 75W-90 petroleum-based hypoid gear lubricant
Differential Capacity 0.95 liters (32 oz.)
NOTE: The fluid should be level with the bottom of the fill hole.
CAUTION: Overfilling the differential can result in oil foaming and/or oil loss from the differential vent.
TRANSMISSION FLUID
Type Mopar ATF +4, Type 9602
Capacity
Estimated Service Fill 4.3 Liters (4.5 qts.)
Overhaul Fill (torque converter empty) 8.8 Liters (9.3 qts.)
DIFFERENTIAL FLUID
Type Mopar Fuel Saving 75W-90 petroleum-based hypoid gear lubricant
Differential Capacity 0.95 liters (32 oz.)
NOTE: The fluid should be level with the bottom of the fill hole.
CAUTION: Overfilling the differential can result in oil foaming and/or oil loss from the differential vent.
TRANSMISSION FLUID
Type Mopar ATF +4, Type 9602
Capacity
Estimated Service Fill 4.3 Liters (4.5 qts.)
Overhaul Fill (torque converter empty) 8.8 Liters (9.3 qts.)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.