Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Powertrain Control Module Initialization (08-030-06 REV.A)
1999 Chrysler LHSSECTION Powertrain Control Module Initialization (08-030-06 REV.A)
Publication date: 2006-08-25
Reference number: 08-030-06 REV.A
Supersedes refnos: 08-030-06
POWERTRAIN CONTROL MODULE INITIALIZATION
Reference number: 08-030-06 REV.A
Supersedes refnos: 08-030-06
POWERTRAIN CONTROL MODULE INITIALIZATION
TECHNICAL SERVICE BULLETIN
Reference Number(s): 08-030-06 REV.A, Date of Issue:
August 25, 2006
Superceded Bulletin(s): 08-030-06, Date of Issue:
July 12, 2006
| CHRYSLER: | 2001 - 2004 (AN) Dakota; 2004 - 2007 (CS) Pacifica; 2007 (DC) Ram Cab & Chassis; 2001 - 2003 (DN) Durango; 2002 - 2007 (DR/DH/D1) Ram Truck; 2004 - 2007 (HB) Durango; 2007 (HG) Aspen; 1999 - 2000 (JA) Breeze/Cirrus/Stratus; 2007 (JK) Wrangler; 2001 - 2006 (JR) Sebring Convertible/Sebring Sedan/Stratus Sedan; 2007 (JS) Sebring; 1998 - 2000 (JX) Sebring Convertible; 2007 (KA) Nitro; 2002 - 2007 (KJ) Liberty; 1999 - 2004 (LH) 300M/Concorde/Intrepid/LHS; 2005 - 2007 (LX) 300/Charger/Magnum; 2007 (MK49) Compass; 2007 (MK74) Patriot; 2005 - 2007 (ND) Dakota; 2000 - 2005 (PL) Neon/SX 2.0; 2007 (PM) Caliber; 2001 - 2007 (PT) Chrysler PT Cruiser/Chrysler PT Cruiser Convertible; 2001 - 2007 (RS) Town & Country/Caravan/Voyager; 2001 - 2005 (ST) Sebring Coupe/Stratus Coupe; 1998 - 2006 (TJ) Wrangler; 2004 - 2006 (VA) Sprinter; 1999 - 2004 (WJ) Grand Cherokee; 2005 - 2007 (WK) Grand Cherokee; 1999 - 2001 (XJ) Cherokee; 2006 - 2007 (XK) Commander; 2005 - 2006 (ZB) Viper; 2004 - 2006 (ZH) Crossfire Coupe/Crossfire Roadster |
| GROUP: | Electrical |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.