SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHRYSLER1999LHSREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSELECTRICAL COMPONENT LOCATIONSELECTRICAL COMPONENT LOCATORSWITCHES
1999 Chrysler LHS

Electrical Component Locator: Switches

1999 Chrysler LHSSECTION Switches
SWITCHES

Component Component Location
Brake Pressure Switch On master cylinder.
Engine Oil Pressure Switch (2.7L) On right side of engine. See Figure.
Engine Oil Pressure Switch (3.2L & 3.5L) On right side of engine.
Multi-Function Switch At top of steering column. See Figure.
Park Brake Switch At left kick panel.
Power Steering Pressure Switch (2.7L) On power steering pressure hose.
Power Steering Pressure Switch (3.2L & 3.5L) Integral to power steering pump.
Seat Belt Switch In left "B" pillar.
Stoplight Switch At top of brake pedal. See Figure.
Transmission Solenoid/Pressure Switch Assembly On top side of transaxle valve body.
Trunk Release Switch Left side of dash. See Figure.
Turn Signal/Hazard Switch Integral to multi-function switch. See Figure.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.