Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHRYSLER1996LHS V6-215 3.5L SOHCREPAIR AND DIAGNOSISTRANSMISSION AND DRIVETRAINTRANSMISSION CONTROL SYSTEMSDESCRIPTION AND OPERATIONTCM OUTPUTSTRANSMISSION FLUID TEMPERATURE (COOLING FAN OPERATION)
1996 Chrysler LHS V6-215 3.5L SOHC
Transmission Fluid Temperature (Cooling Fan Operation)
1996 Chrysler LHS V6-215 3.5L SOHCSECTION Transmission Fluid Temperature (Cooling Fan Operation)
One of the indirect outputs from the TCM is the Transmission fluid temperature. The PCM monitors the transmission fluid temperature at all times. When the fluid temperature reaches 244°F the Low Speed Radiator Fan is turned ON. It will be turned back OFF when the fluid temperature drops below 236°F. If the transmission fluid temperature reaches 250°F then Hi Speed Radiator Fan is turned ON. The Hi Speed Radiator Fan is turned back OFF when the temperature drops to 244°F or lower.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.