Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Signal Ground
1996 Chrysler LHS V6-215 3.5L SOHCSECTION Signal Ground
CIRCUIT OPERATION
Circuit Z11 connects to cavity 47 of the Powertrain Control Module (PCM) connector. The Z11 circuit provides ground for the sensors that provide inputs to the PCM.
Circuit Z11 connects to cavity 47 of the Powertrain Control Module (PCM) connector. The Z11 circuit provides ground for the sensors that provide inputs to the PCM.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.